Cleenol Descaler and Tarnish Remover - 5 Ltrs.

Description

Enables rapid penetration and removal of scale deposits.  Effectively removes all forms of metal tarnish, hard water scale, rust from ferrous metals and even brightens aluminium and chrome surfaces.  The properties of this product enable it to be used extensively in the catering and food industries for general purpose cleaning and maintenance and also in the leisure industry for the descaling of pool sides, shower areas and changing rooms etc. along with the removal of body fats.

Dilution

1:50

Surface Where to Use:

Wide Range of Surfaces

Surface Where not to Use:

Carpets & Textiles

Application Method

Add 1 part product to 5 parts water. Always add acid to water, not water to acid.Apply by swab, brush, non-misting low pressure spray or immersion. Allow for removal of scale or tarnish.Thoroughly rinse components after treatment. Repeat descaling process if necessary.

When descaling kettles or urns, do not boil. Use at room temperature only.For dishwashers use a 50:50 solution. Continue to apply to scale until fizzing has ceased, carry out wash cycle with no load to completely remove any traces of product. Repeat if necessary.

For medium to light scaling of swimming pool sides dilute 1 part product to 5 parts water.

For severe scale use undiluted. Apply using mop cloth or machine, taking care to minimise any contamination of the pool. Leave a few minutes allowing to react, repeat if required. Rinse well with clean water.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Continue